Add Camera To OEM Screen Ford Transit (2013-2018) Sync 1 with 4.2" Colour Screen (CODING REQUIRED)

Reverse Camera input adaptor for Ford SYNC 1 systems with a 4.2" colour screen that enables connection of an aftermarket NTSC camera to the vehicles OEM screen.

If you are unsure of which version of SYNC you have then please see our guide to identifying SYNC and which camera interface to use.

The Vehicle will need programming to enable the rear view camera function.

This is not suitable for the following non-colour or monochrome SYNC 1 systems or FORD NAV MFD LOW screens. To check, remove the screen from the vehicle, if the sticker on the underside says FORD NAV MFD LOW then please use 27-239 to add a camera.

The Adaptor has 12 pin male and female connectors with a RCA Phono camera input. 

Please Note: Vehicle Coding required, we recommend this is carried out by a professional.

Will fit a multiple Ford vehicles including:

• Fiesta (2008 – 2017)
• Focus (2011-2018)
• C-Max/Grand C-Max (2011-2019)
• B-Max (2012-2017)
• Ka+ (2016-2020)
• Ecosport (2012-2018)
• Grand Tourneo Connect (2012-2020)
• Transit Connect (2013-2018)
• Transite Custom (2013-2018)
• Transit (2013-2018)
• Transit Courier (2014 >) 
• Kuga (2013-2019)
• Ranger (2011-2019)