Add/Retain Camera To OEM Screen Subaru BRZ (2017-2020) (16 PIN CONNECTOR)

Allows you to add an aftermarket reverse view camera to the original factory fitted head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).

This adapter cable also allows you retain the original OEM factory fitted camera when installing a new aftermarket head unit.

Installation

To retain/ keep the factory reverse camera when installing an aftermarket unit

• Connect the Black wire to the chassis ground
• Connect the Yellow wire to the accessory power
• Connect the male Yellow RCA plug to the reverse camera input of the aftermarket radio
• Connect the reverse wire from the aftermarket radio to the reverse signal in the vehicle
• Disregard the loose Green/ Purple wire, it will not be used when retaining

PLEASE NOTE: If retaining a camera please purchase this adapter cable with a 12v to 6v voltage converter, part number 10-671

To add an aftermarket camera to the original system screen

• Connect the Black wire to the ground wire of the aftermarket camera
• Connect the power wire of the aftermarket camera to accessory power
• Tape off and disregard the yellow wire, it is not required 
• Connect the female Yellow RCA plug to the aftermarket camera
  
  

Compatible with select vehicle models

Toyota

4-Runner (without a factory amp) 2012-2013

Auris 2010-2014

Avalon 2013-2014

Avensis 2011-2014

Camry 2012-2013

GT86 2012-2015

Highlander 2013

Hilux 2011-2014

Prius 2011-2014

Prius PHV 2012-2015

Prius V 2012-2014

Rav-4 (before build date Nov. 2013) 2014

Rav-4 2013

Sequoia 2013

Tacoma (with NAV) 2012-2013

Venza 2013-2014

Verso 2009-2014

Scion

FRS 2013-2015

iQ 2014-2015

tC 2014-2015

xB 2014-2015

xD 2014-2014

Subaru

BRZ (2017 - 2020)

Forester 4th Gen (SJ) (2014 -2018)

Impreza (2015 - 2017)

XV (2015 - 2018)